Browse Topic: Cadmium

Items (1,999)
Find
Liquid Runway Deicing/Anti-icing ProductAMS1435E (Current)03/12/2024
This specification covers runway deicing and anti-icing products in the form of a liquid. Unless otherwise stated, all specifications referenced herein are latest (current) revision.
G-12RDP Runway Deicing Product Committee
Material Specification
Liquid Runway Deicing/Anti-icing ProductAMS1435E-TEST-REC (Current)03/12/2024
This specification covers runway deicing and anti-icing products in the form of a liquid. Unless otherwise stated, all specifications referenced herein are latest (current) revision.
G-12RDP Runway Deicing Product Committee
Material Specification
Cadmium Plate Cyclic Corrosion Test . AIR6130A (Current)01/25/2023
14-day material test to determine the cyclic effects of runway deicing compounds on cadmium plated parts.
null, null
Information Report
Hydraulic Hose FittingsJ516_202111 (Current)11/09/2021
This SAE Standard provides general and dimensional specifications for the most common hose fittings used in conjunction with hydraulic hoses specified in SAE J517 and utilized in hydraulic systems on mobile and stationary equipment. The general specifications contained in Sections 1 through 17 are applicable to all hydraulic hose fittings and supplement the detailed specifications for the 100R-series fittings contained in the later sections of this document. This document shall be utilized as a procurement document only to the extent agreed upon by the manufacturer and user. Refer to SAE J517 for specifications of hose and information on hose assemblies. SAE J1273 contains information on application factors affecting hose fittings, hose, and hose assemblies. The rated working pressure of a hose assembly comprising SAE J516 fittings and SAE J517 hoses shall not exceed the lower of the two working pressure rated values. The following are hose fitting types contained in this document
Hydraulic Hose and Hose Fittings Committee
Technical Standard
Hydraulic Hose FittingsJ516_202111-TEST-REC (Historical)11/09/2021
This SAE Standard provides general and dimensional specifications for the most common hose fittings used in conjunction with hydraulic hoses specified in SAE J517 and utilized in hydraulic systems on mobile and stationary equipment. The general specifications contained in Sections 1 through 17 are applicable to all hydraulic hose fittings and supplement the detailed specifications for the 100R-series fittings contained in the later sections of this document. This document shall be utilized as a procurement document only to the extent agreed upon by the manufacturer and user. Refer to SAE J517 for specifications of hose and information on hose assemblies. SAE J1273 contains information on application factors affecting hose fittings, hose, and hose assemblies. The rated working pressure of a hose assembly comprising SAE J516 fittings and SAE J517 hoses shall not exceed the lower of the two working pressure rated values. The following are hose fitting types contained in this document
Hydraulic Hose and Hose Fittings Committee
Technical Standard
LINK, TERMINAL, CONNECTINGAS25226C (Current)10/28/2021
AE-8C2 Terminating Devices and Tooling Committee
Technical Standard
CONNECTOR, PLUG, ELECTRIC, UTILITYAS34411A-TEST-REC (Historical)10/26/2021
AE-8C1 Connectors Committee
Technical Standard
CONNECTOR, PLUG, ELECTRIC, UTILITYAS34411A (Current)10/26/2021
AE-8C1 Connectors Committee
Technical Standard
STUD, STEPPED, 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .4375-14 UNS X .3750-24 UNF-3AAS151401D (Current)10/12/2021
E-25 General Standards for Aerospace and Propulsion Systems
Technical Standard
NUT, SELF LOCKING – SPLINE DRIVE, EXTENDED WASHER, UNS G87400, CADMIUM PLATE, MJ THREAD, METRICMA3353D (Current)10/12/2021
E-25 General Standards for Aerospace and Propulsion Systems
Technical Standard
FITTING, ADAPTER, UNION, FLARED TO BOSSAS933E (Historical)10/08/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
Lubrication FittingsJ534_202110 (Current)10/06/2021
This SAE Standard covers complete general and dimensional specifications for the various types of lubrication fittings and related threaded components intended for general application in the automotive and allied fields.
Hydraulic Tube Fittings Committee
Technical Standard
Lubrication FittingsJ534_202110-TEST-REC (Historical)10/06/2021
This SAE Standard covers complete general and dimensional specifications for the various types of lubrication fittings and related threaded components intended for general application in the automotive and allied fields.
Hydraulic Tube Fittings Committee
Technical Standard
BEARING, ROLLER, NEEDLE, TRACK ROLLER INTEGRAL STUD, SEALED, TYPE VIII ANTIFRICTION, INCHAS21440C (Current)10/06/2021
ACBG Rolling Element Bearing Committee
Technical Standard
FITTING, ELBOW, 45°, PIPE TO HOSEAS5186A (Current)09/01/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
FITTING, ELBOW, 90°, PIPE TO HOSEAS5185A (Current)09/01/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
CONNECTOR ACCESSORIES, ELECTRICAL, STRAIN RELIEF, STRAIGHT, CATEGORY 4C (FOR MIL-DTL-24308 CONNECTORS)AS85049/48E08/27/2021
Scope is unavailable.
AE-8C1 Connectors Committee
Technical Paper
FITTING, TEE, INTERNAL STRAIGHT THREAD PORTAS5192F (Current)08/26/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
FITTING, ELBOW, 45°, INTERNAL STRAIGHT THREAD PORTAS5191B (Current)08/26/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
FITTING, ELBOW, 90°, INTERNAL STRAIGHT THREAD PORTAS5190C (Current)08/26/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
STUD - STRAIGHT, CADMIUM PLATED, STEEL, SAE 8740, 125 KSI MIN, .3125-18UNS-3A X .3125-24 UNF-3AAS126275D (Current)08/17/2021
E-25 General Standards for Aerospace and Propulsion Systems
Technical Standard
FERRULE, FLEXIBLE CONDUIT, RADIO FREQUENCY SHIELDINGAS25065B (Current)08/14/2021
AE-8A Elec Wiring and Fiber Optic Interconnect Sys Install
Technical Standard
Hydraulic Flange Clamps, Two-Screw Flange Connection to be Used with SAE J518-1 (Code 61) Connections Where Only Low Pressure is RequiredJ518/3_202108 (Current)08/12/2021
This SAE Standard outlines general and dimensional specifications for flange clamps for use in low pressure applications with SAE J518-1 connections. For port dimensions, port design considerations, and flange head dimensions, please refer to SAE J518-1. The rated working pressure of an assembly shall not exceed the least of all the component working pressure rated values. The following general specifications supplement the dimensional data contained in the tables with respect to all unspecified detail. Parts manufactured to this standard are also compatible with ISO 6162-1 port connections and flange heads.
Hydraulic Hose and Hose Fittings Committee
Technical Standard
Minimum General Standards for Oxygen SystemsAS861B (Current)08/11/2021
This standard covers all types of oxygen breathing equipment used in non-military aircraft. It is intended that this standard supplement the requirements of the detail specification or drawings of specific components or assemblies, e.g., regulators, masks, cylinders, etc. Where a conflict exists between this and detail specifications, detail specifications shall take precedence.
A-10 Aircraft Oxygen Equipment Committee
Technical Standard
Guide for Installation of Electrical Wire and Cable on Aircraft Landing GearAIR4004A (Current)08/09/2021
Recent field experience has indicated significant problems with some types of wire and cables as routed on aircraft landing gear. This SAE Aerospace Information Report (AIR) is intended to identify environmental concerns the designer should consider, materials that appear to be most suitable for use in these areas, routing, clamping, and other protection techniques that are appropriate in these applications. In recent years aircraft certification regulatory agencies introduced new regulations regarding Electrical Wiring Interconnection Systems (EWIS) to further enhance safety of the associated systems and aircraft overall.
A-5B Gears, Struts and Couplings Committee
Information Report
Compound, Corrosion-Preventive Hard Film, Hot ApplicationAMS3075F (Current)08/09/2021
This specification covers a stable, nonvolatile, petroleum-base compound in a form suitable for application by dipping at 170 to 210 °F (77 to 99 °C).
AMS B Finishes Processes and Fluids Committee
Material Specification
Disposition of Landing Gear Components Involved in Accidents/IncidentsARP4915B-TEST-REC (Historical)08/05/2021
This document establishes a procedure for disposition of landing gear components that have been involved in accidents/incidents. The recommendations in this document apply to components made of ferrous and non-ferrous alloys. The recommendations in this document do not apply to components made of non metallic composite materials.
A-5B Gears, Struts and Couplings Committee
Recommended Practice
Disposition of Landing Gear Components Involved in Accidents/IncidentsARP4915B (Current)08/05/2021
This document establishes a procedure for disposition of landing gear components that have been involved in accidents/incidents. The recommendations in this document apply to components made of ferrous and non-ferrous alloys. The recommendations in this document do not apply to components made of non metallic composite materials.
A-5B Gears, Struts and Couplings Committee
Recommended Practice
FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPEAS6047D (Current)08/03/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 3 (CLASS L AND E)AS34461A-TEST-REC (Historical)08/02/2021
AE-8C1 Connectors Committee
Technical Standard
CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 3 (CLASS L AND E)AS34461A (Current)08/02/2021
AE-8C1 Connectors Committee
Technical Standard
CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMODATION, CATEGORY 3B FOR MIL-DTL-38999 SERIES III AND IV CONNECTORSAS85049/117D (Current)07/30/2021
AE-8C1 Connectors Committee
Technical Standard
CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, NON-SELF LOCKING AND SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-83723 SERIES III, AS50151 CRIMP, AS95234, AS81703 SERIES III, AND MIL-DTL-26482 SERIES II CONNECTORS)AS85049/109D (Current)07/30/2021
AE-8C1 Connectors Committee
Technical Standard
CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, 90 DEGREE, SELF-LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)AS85049/114D (Current)07/30/2021
AE-8C1 Connectors Committee
Technical Standard
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-DTL-38999 SERIES III AND IV CONNECTORS)AS85049/78C (Current)07/28/2021
AE-8C1 Connectors Committee
Technical Standard
FITTING, UNION, STANDARD AND REDUCER, BULKHEAD, FLARELESSAS1007L (Historical)07/28/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, ENVIRONMENTAL, 45°, SHIELD TERMINATION, CATEGORY 2B, NONSELF-LOCKING (MIL-DTL-38999 SERIES I AND II CONNECTORS)AS85049/77C (Current)07/28/2021
AE-8C1 Connectors Committee
Technical Standard
CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 2 (CLASS E)AS34451A-TEST-REC (Historical)07/27/2021
AE-8C1 Connectors Committee
Technical Standard
CONNECTOR, PLUG, ELECTRIC, CRIMP TYPE, RACK AND PANEL, SERIES 2 (CLASS E)AS34451A (Current)07/27/2021
AE-8C1 Connectors Committee
Technical Standard
SCREW, MACHINE - STEEL, CADMIUM PLATED, HEXAGON HEAD, UNS G87400, 125 KSI MIN, .1380-40 UNJF-3AAS9516C (Historical)07/19/2021
E-25 General Standards for Aerospace and Propulsion Systems
Technical Standard
Remover, Paint Epoxy and Polyurethane Paint SystemsAMS1375B (Current)07/13/2021
This specification covers an alkaline-type, thickened paint remover in the form of a liquid.
AMS J Aircraft Maintenance Chemicals and Materials Committee
Material Specification
BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCHAS24461D (Historical)07/07/2021
ACBG Rolling Element Bearing Committee
Technical Standard
BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCHAS24461D-TEST-REC (Historical)07/07/2021
ACBG Rolling Element Bearing Committee
Technical Standard
FITTING, 37° SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 45°AS6094B (Current)06/28/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
FITTING, 37° SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, TEEAS6095B (Current)06/28/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, INTERNAL ON SIDE, FLARED, 37° SPHERICALAS6098B (Current)06/28/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
FITTING, 37° SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 90°AS6093B (Current)06/28/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
FITTING, 37° SPHERICAL FLARED, CONNECTOR, MULTIPLE FLUID PRESSURE LINE, 75°AS6092B (Current)06/28/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
FITTING, ADAPTER, PORT, REDUCER, 37° SPHERICAL, FLAREDAS6213B (Current)06/22/2021
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
Technical Standard
CONNECTOR ACCESSORIES, ELECTRICAL BACKSHELL, STRAIGHT, SELF LOCKING AND NON-SELF LOCKING, PRE-ATTACHED SHIELD TERMINATION (RFI/EMI), BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)AS85049/115D (Current)06/22/2021
AE-8C1 Connectors Committee
Technical Standard
Items per page:
1 – 50 of 1999