Browse Topic: Nonferrous alloys

Items (3,478)
Find
Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.5Mg (355.0-T71), Solution Heat Treated and OveragedAMS4280K (Current)12/9/2025
This specification covers an aluminum alloy in the form of permanent mold castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Investment Castings, 7.0Si - 0.32Mg (356.0-T6), Solution and Precipitation Heat TreatedAMS4260H (Current)12/9/2025
This specification covers an aluminum alloy in the form of castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Castings, 7.0Si - 0.55Mg - 0.12Ti (F357.0-T6), Solution and Precipitation Heat TreatedAMS4289A (Current)12/9/2025
This specification covers an aluminum alloy in the form of castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.50Mg (355.0-T6), Solution and Precipitation Heat TreatedAMS4281H (Current)12/9/2025
This specification covers an aluminum alloy in the form of permanent mold castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged AMS4242D (Current)12/9/2025
This specification covers an aluminum alloy in the form of castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged AMS4223F (Current)12/9/2025
This specification covers an aluminum alloy in the form of castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Castings, High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged AMS4229H (Current)12/9/2025
This specification covers an aluminum alloy in the form of sand, permanent mold, and composite mold castings.
AMS D Nonferrous Alloys Committee
Nickel-Aluminum-Bronze, Martensitic, Sand, Centrifugal and Continuous Castings, 78Cu - 11Al - 5.1Ni - 4.8Fe, Quench Hardened and Temper AnnealedAMS4881E (Current)11/25/2025
This specification covers a nickel-aluminum bronze alloy in the form of sand, centrifugal or continuous castings.
AMS D Nonferrous Alloys Committee
Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings, 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe, Quench Hardened and Temper Annealed (TQ50)AMS4880E (Current)11/25/2025
This specification covers an aluminum bronze alloy in the form of centrifugal and continuous-cast castings.
AMS D Nonferrous Alloys Committee
Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe As CastAMS4870G (Current)11/25/2025
This specification covers an aluminum bronze alloy in the form of centrifugal and chill castings.
AMS D Nonferrous Alloys Committee
Castings, Leaded Bronze, Sand and Centrifugal 80Cu - 10Sn - 9.5Pb As CastAMS4842G (Current)11/25/2025
This specification covers a leaded bronze in the form of sand and centrifugal castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Solution Heat Treated, Cold Worked and Naturally Aged (2219 -T31/-T351)AMS4601B (Current)11/25/2025
This specification covers an aluminum alloy in the form of sheet and plate.
AMS D Nonferrous Alloys Committee
Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Sand Cast, Solution, and Precipitation Heat TreatedAMS4482B (Current)11/25/2025
This specification covers a dilute aluminum/TiB2 metal matrix composite in the form of sand castings.
AMS D Nonferrous Alloys Committee
Cast Aluminum Alloy Composite, 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P), Investment Cast, Solution and Precipitation Heat TreatedAMS4471C (Current)11/25/2025
This specification covers a dilute aluminum/TiB2 metal matrix composite in the form of investment castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Plate (7255-T7751), 8.0Zn - 2.3Cu - 2.0Mg - 0.12Zr, Solution Heat Treated, Stress Relieved, and OveragedAMS4463B (Current)11/25/2025
This specification covers an aluminum alloy in the form of plate 0.750 to 1.500 inch, incl ( 19.05 to 38.10 mm, incl) in thickness (see 8.5).
AMS D Nonferrous Alloys Committee
Verifying large alternate product code for an AMS document - AMS112425-1AMS112425XXXXXXXXXXXXXXXXXXXXXX-1 (Current)11/24/2025
Verifying large alternate product code for an AMS document - AMS112425-1
A-10 Aircraft Oxygen Equipment Committee
Magnesium Alloy, Sheet and Plate, 3.0Al - 1.0Zn - 0.20Mn (AZ31B-H24), Cold Rolled, Partially AnnealedAMS4377K (Current)11/21/2025
This specification covers a magnesium alloy in the form of sheet and plate.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Plate (2397-T87), 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn, Solution Heat Treated, Cold Worked, and Artificially AgedAMS4328C (Current)11/21/2025
This specification covers an aluminum alloy in the form of plate 3.000 to 6.000 inch (76.20 to 152.40 mm), inclusive, in nominal thickness (see 8.5).
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A380.0-F) As Cast AMS4291K (Current)11/21/2025
This specification covers an aluminum alloy in the form of die castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Die Castings 9.5Si - 0.50Mg (360.0-F) As Cast AMS4290N (Current)11/21/2025
This specification covers an aluminum alloy in the form of die castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Castings, Centrifugal 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated AMS4285G (Current)11/21/2025
This specification covers an aluminum alloy in the form of centrifugal castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated AMS4284L (Current)11/21/2025
This specification covers an aluminum alloy in the form of permanent mold castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Plate, 5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475-T7351), Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat TreatedAMS4202F (Current)11/13/2025
This specification covers an aluminum alloy in the form of plate 0.250 to 4.000 inch (6.35 to 101.60 mm) inclusive, in thickness (see 8.6).
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat TreatedAMS4153N (Current)11/13/2025
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing up to 32 square inches (206 cm2) in area (see 8.5).
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-O) Annealed; or when specified, “As Fabricated” (2024-F)AMS4035N (Current)11/13/2025
This specification covers an aluminum alloy in the form of sheet and plate 0.010 to 1.750 inch (0.25 to 44.45 mm) in thickness, supplied in the annealed (O temper) condition (see 8.4). When specified, product shall be supplied in the “as fabricated” (F) temper.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Castings, 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6), Solution and Precipitation Heat TreatedAMS4215K (Current)11/13/2025
This specification covers an aluminum alloy in the form of sand, permanent mold, composite mold, and investment castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and OveragedAMS4329C (Current)9/30/2025
This specification covers an aluminum alloy in the form of plate 4.001 to 7.000 inch, incl. (101.62 to 177.80 mm, incl.) in thickness (see 8.4).
AMS D Nonferrous Alloys Committee
Aluminum Alloy Plate (2624-T351) 4.1Cu - 1.4Mg - 0.6Mn Solution Heat Treated, Cold Worked and Naturally AgedAMS4464B (Current)9/30/2025
This specification covers an aluminum alloy in the form of plate 0.500 to 1.500 inch, incl (12.70 to 38.10 mm, incl) in thickness (see 8.4).
AMS D Nonferrous Alloys Committee
Test Method and Limits for Bow Height of Aluminum Sheet Samples After Chemical MillingAS6507 (Current)11/2/2021
The results of this test are intended to be a useful indication of the resistance to distortion of bare or two-side Alclad, flat sheet aluminum used in chemical milling applications.
AMS D Nonferrous Alloys Committee
Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Half Hard (H02)AMS4507J (Current)10/28/2021
This specification covers a copper-zinc alloy (brass) in the form of sheet, strip, and plate.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Extruded Profiles (2065-T84) 4.2Cu - 1.2Li - 0.52Mg - 0.32Mn - 0.32Ag - 0.1Zr Solution Heat Treated, Stress Relieved by Stretching and Artificially AgedAMS4366A (Current)10/28/2021
This specification covers an aluminum-lithium alloy in the form of extruded profiles with a maximum cross-sectional area of 19 in2 (123 cm2) and a maximum circle size of 11 inches (279 mm) from 0.040 to 0.499 inch (1.00 to 12.50 mm) in thickness (see 8.7).
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Extruded Profiles (2065-T84) 4.2Cu - 1.2Li - 0.52Mg - 0.32Mn - 0.32Ag - 0.1Zr Solution Heat Treated, Stress Relieved by Stretching and Artificially AgedAMS4366A-TEST-REC (Historical)10/28/2021
This specification covers an aluminum-lithium alloy in the form of extruded profiles with a maximum cross-sectional area of 19 in2 (123 cm2) and a maximum circle size of 11 inches (279 mm) from 0.040 to 0.499 inch (1.00 to 12.50 mm) in thickness (see 8.7).
AMS D Nonferrous Alloys Committee
Rings, Flash Welded Aluminum and Aluminum AlloysAMS7488G (Current)10/18/2021
This specification covers flash welded rings made of aluminum and aluminum alloys.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-O) AnnealedAMS4077J (Current)10/15/2021
This specification covers an aluminum alloy in the form of sheet and plate from 0.010 to 0.499 inch (0.25 to 12.67 mm), inclusive, in thickness (see 8.6).
AMS D Nonferrous Alloys Committee
Aluminum Alloy Sheet and Plate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn (Clad One Side 2024-O) AnnealedAMS4077J-TEST-REC (Historical)10/15/2021
This specification covers an aluminum alloy in the form of sheet and plate from 0.010 to 0.499 inch (0.25 to 12.67 mm), inclusive, in thickness (see 8.6).
AMS D Nonferrous Alloys Committee
Aluminum Alloy Extrusions 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T76511, -T76510) Solution Heat Treated, Stress-Relieved, Straightened, and OveragedAMS4415B (Current)9/15/2021
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles (shapes), and tubing 0.040 to 4.000 inches (1.00 to 100.00 mm) in nominal diameter, least dimension, or wall thickness (see 8.7).
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Plate, 7.9Zn - 1.8Cu - 2.0Mg - 0.10Zr (7099-T7651) Solution Heat Treated, Stress Relieved, and OveragedAMS4364A (Current)9/15/2021
This specification covers an aluminum alloy in the form of plate from 1.000 to 6.000 inches (25.40 to 152.40 mm) in thickness (see 8.6).
AMS D Nonferrous Alloys Committee
Aluminum Alloy Extrusions 8.9Zn - 2.2Cu - 2.2Mg - 0.15Zr (7136-T76511, -T76510) Solution Heat Treated, Stress-Relieved, Straightened, and OveragedAMS4415B-TEST-REC (Historical)9/15/2021
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles (shapes), and tubing 0.040 to 4.000 inches (1.00 to 100.00 mm) in nominal diameter, least dimension, or wall thickness (see 8.7).
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Plate, 7.9Zn - 1.8Cu - 2.0Mg - 0.10Zr (7099-T7651) Solution Heat Treated, Stress Relieved, and OveragedAMS4364A-TEST-REC (Historical)9/15/2021
This specification covers an aluminum alloy in the form of plate from 1.000 to 6.000 inches (25.40 to 152.40 mm) in thickness (see 8.6).
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Sheet and Plate 4.0Cu - 1.0Li - 0.40Mg - 0.35Ag - 0.13Zr (2195-T8) Solution Heat Treated, Cold Worked, and Artificially AgedAMS4474B (Current)9/13/2021
This specification covers an aluminum alloy in the form of sheet and plate with a thickness of 0.125 to 0.499 inch (3.20 to 12.67 mm), inclusive (see 8.6).
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Sheet and Plate 4.0Cu - 1.0Li - 0.40Mg - 0.35Ag - 0.13Zr (2195-T8) Solution Heat Treated, Cold Worked, and Artificially AgedAMS4474B-TEST-REC (Historical)9/13/2021
This specification covers an aluminum alloy in the form of sheet and plate with a thickness of 0.125 to 0.499 inch (3.20 to 12.67 mm), inclusive (see 8.6).
AMS D Nonferrous Alloys Committee
Silver Alloy, Brazing Filler Metal 85Ag - 15Mn 1760 to 1780 °F (960 to 971 °C) Solidus-Liquidus RangeAMS4766J (Current)9/1/2021
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
Silver Alloy, Brazing Filler Metal 92.5Ag - 7.2Cu - 0.22Li 1435 to 1635 °F (779 to 891 °C) Solidus-Liquidus RangeAMS4767H (Current)9/1/2021
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
Silver Alloy, Brazing Filler Metal 40Ag - 30Cu - 30Zn 1245 to 1340 °F (674 to 727 °C) Solidus-Liquidus RangeAMS4762C (Current)9/1/2021
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips, and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
Silver Alloy, Brazing Filler Metal 60Ag - 30Cu - 10Sn 1115 to 1325 °F (602 to 718 °C) Solidus-Liquidus RangeAMS4773H (Current)9/1/2021
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
Silver Alloy, Brazing Filler Metal 38Ag - 32Cu - 28Zn - 2.0Sn 1200 to 1330 °F (649 to 721 °C) Solidus-Liquidus RangeAMS4761C (Current)9/1/2021
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips, and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
Silver Alloy Brazing Filler Metal 63Ag - 28.5Cu - 6.0Sn - 2.5Ni 1275 to 1475 °F (691 to 802 °C) Solidus-Liquidus RangeAMS4774H (Current)9/1/2021
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
Silver Alloy Brazing Filler Metal 50Ag - 28Zn - 20Cu - 2.0Ni 1220 to 1305 °F (660 to 707 °C) Solidus-Liquidus RangeAMS4788C (Current)9/1/2021
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips, and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
Silver Alloy, Brazing Filler Metal 40Ag - 30Cu - 30Zn 1245 to 1340 °F (674 to 727 °C) Solidus-Liquidus RangeAMS4762C-TEST-REC (Historical)9/1/2021
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips, and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
Silver Alloy, Brazing Filler Metal 85Ag - 15Mn 1760 to 1780 °F (960 to 971 °C) Solidus-Liquidus RangeAMS4766J-TEST-REC (Historical)9/1/2021
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
Items per page:
1 – 50 of 3478