Browse Topic: Copper alloys

Items (904)
This specification covers a nickel-aluminum bronze alloy in the form of sand, centrifugal or continuous castings.
AMS D Nonferrous Alloys Committee
Prior to 1950, use of the helicopter for evacuation was extremely limited, as military top brass often considered it a worthless contraption; thus, rescue was uncertain at best for downed pilots and wounded soldiers stranded behind enemy lines. However, this all changed in Korea, where twelve U.S. Army helicopters from three detachments, working in tandem with seven, newly created Mobile Army Surgical Hospital (MASH) units, would fundamentally change the Army's medical-evacuation doctrine forever. Using several models of the Bell H-13, the Hiller H-23, and the Sikorsky H-5 and H-19, this small band of courageous pilots pushed themselves and their aircraft to their limits, transporting 21,212 critically wounded soldiers for life-saving surgery to various MASH units, cutting the fatality rate from World War II in half. Adopting the 3rd Air Rescue Squadron's motto, "That Others May Live," these pilots and their helicopters were affectionately known to the wounded as "Angels of Mercy."
Fardink, Paul
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips, and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips, and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies
This specification covers a silver alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, and chips, and a viscous mixture (paste) of powder in a suitable binder.
AMS D Nonferrous Alloys Committee
This specification covers a gold-palladium-nickel alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, chips, preforms and a viscous mixture (paste) of the powder in a suitable binder.
AMS F Corrosion Heat Resistant Alloys Committee
This specification covers a gold-palladium-nickel alloy in the form of wire, rod, sheet, strip, foil, pig, powder, shot, chips, preforms, and a viscous mixture (paste) of the powder in a suitable binder.
AMS F Corrosion Heat Resistant Alloys Committee
This specification covers concentric lay stranded and rope-lay stranded round electrical conductor fabricated from copper, copper alloy or aluminum. This specification also covers thermocouple extension conductor fabricated from nickel/chromium or nickel/aluminum/manganese. The conductors in this specification are suitable for use in insulated wires used in aerospace and other applications.
AE-8D Wire and Cable Committee
This practice provides recommendations concerning the chemical milling of aluminum, magnesium, high temperature nickel alloys, titanium alloys, copper alloys, and specialty alloys.
AMS B Finishes Processes and Fluids Committee
This specification covers one type of aluminum bronze in the form of bars, rods, forgings, and forging stock.
AMS D Nonferrous Alloys Committee
This specification covers a copper-beryllium alloy in the form of bars and rods up to 3.000 inches (76.20 mm), inclusive, in nominal diameter or least distance between parallel sides (see 8.7).
AMS D Nonferrous Alloys Committee
This SAE Aerospace Information Report (AIR) is limited to information about evaluation of a new cadmium-free high-strength copper alloy. The testing described in this AIR was conducted prior to the publication of AS6324 and is intended to provide information regarding evaluation of this new copper alloy. It is recognized that a simple specification such as AS29606 can not cover all possible requirements for performance in every field application. To address this basic issue, the introduction of a new, but similar to already field proven, component requires comparative testing to verify the new component will perform at the same or above level as the already approved component in a broader set of relevant tests.
AE-8D Wire and Cable Committee
This standard establishes definitions, guidelines, and requirements governing materials (e.g., alloy and heat treat condition) allowed for use in chemical process test specimens when requirements call for a generic class of alloy.
AMS B Finishes Processes and Fluids Committee
Items per page:
1 – 50 of 904