Browse Topic: Chemical processing

Items (355)
Find
Terms Used in Aerospace Metals SpecificationsAS7766 (Current)09/15/2021
This SAE Aerospace Standard (AS) defines and clarifies terms used in aerospace materials and process specifications, standards, and recommended practices.
AMS B Finishes Processes and Fluids Committee
Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield StrengthAMS4921R (Current)07/07/2021
This specification covers one grade of commercially pure titanium in the form of bars, wire, forgings, flash welded rings, up to 4.000 inches (101.60 mm), inclusive, in nominal diameter or least distance between parallel sides, and stock for forging or flash welded rings.
AMS G Titanium and Refractory Metals Committee
Titanium Bars, Wire, Forgings, and Rings Commercially Pure 70 ksi (483 MPa) Yield StrengthAMS4921R-TEST-REC (Historical)07/07/2021
This specification covers one grade of commercially pure titanium in the form of bars, wire, forgings, flash welded rings, up to 4.000 inches (101.60 mm), inclusive, in nominal diameter or least distance between parallel sides, and stock for forging or flash welded rings.
AMS G Titanium and Refractory Metals Committee
Plating, Cadmium (Electrodeposited)AMSQQP416F (Historical)03/01/2021
This specification covers the requirements for electrodeposited cadmium plating.
AMS B Finishes Processes and Fluids Committee
Plating, Cadmium (Electrodeposited)AMSQQP416F-TEST-REC (Historical)03/01/2021
This specification covers the requirements for electrodeposited cadmium plating.
AMS B Finishes Processes and Fluids Committee
Self-Healing, Recyclable, Shape Memory PolymersTBMG-3798411/01/2020
By tweaking the chemistry of a single polymer, researchers have created a family of synthetic materials that ranges in texture from ultra-soft to extremely rigid. The materials are 3D-printable, self-healing, recyclable, and naturally adhere to each other in air or underwater. These characteristics make them suited for more realistic prosthetics and soft robotics as well as broad military applications such as agile platforms for air vehicles and futuristic, self-healing aircraft wings.
Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Duplex AnnealedAMS6907C (Current)10/09/2020
This specification covers a titanium alloy in the form of bars, forgings up through 4.000 inches (101.60 mm), inclusive in nominal diameter or least distance between parallel sides and 32 square inches (206.46 cm2) maximum cross sectional area, and stock for forging of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 4V, Extra Low Interstitial AnnealedAMS4930L (Current)10/09/2020
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings 4.000 inches (101.60 mm) and under in nominal diameter or distance between parallel sides, and stock for forging or flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Forgings, and Forging Stock 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Duplex AnnealedAMS6907C-TEST-REC (Historical)10/09/2020
This specification covers a titanium alloy in the form of bars, forgings up through 4.000 inches (101.60 mm), inclusive in nominal diameter or least distance between parallel sides and 32 square inches (206.46 cm2) maximum cross sectional area, and stock for forging of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 4V, Extra Low Interstitial AnnealedAMS4930L-TEST-REC (Historical)10/09/2020
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings 4.000 inches (101.60 mm) and under in nominal diameter or distance between parallel sides, and stock for forging or flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Forgings, and Rings 5Al - 2.5Sn, Extra Low Interstitial AnnealedAMS4924J (Current)08/24/2020
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings 4.000 inches (101.60 mm) and under in nominal diameter or least distance between parallel sides, and stock for forging and flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Forgings, and Rings 5Al - 2.5Sn, Extra Low Interstitial AnnealedAMS4924J-TEST-REC (Historical)08/24/2020
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings 4.000 inches (101.60 mm) and under in nominal diameter or least distance between parallel sides, and stock for forging and flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified StrengthAMS4963E (Current)06/29/2020
This specification covers a titanium alloy in the form of bars, wire, forgings, and flash welded rings up through 3.999 inches (101.57 mm), inclusive, and stock for forging, flash welded rings, or heading.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Wire, and Forgings 7Al - 4Mo Solution and Precipitation Heat TreatedAMS4970L (Current)06/29/2020
This specification covers a titanium alloy in the form of bars, wire, forgings up to 4.000 inches (101.60 mm), inclusive, and forging stock.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified StrengthAMS4963E-TEST-REC (Historical)06/29/2020
This specification covers a titanium alloy in the form of bars, wire, forgings, and flash welded rings up through 3.999 inches (101.57 mm), inclusive, and stock for forging, flash welded rings, or heading.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Wire, and Forgings 7Al - 4Mo Solution and Precipitation Heat TreatedAMS4970L-TEST-REC (Historical)06/29/2020
This specification covers a titanium alloy in the form of bars, wire, forgings up to 4.000 inches (101.60 mm), inclusive, and forging stock.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Forgings 8Al - 1Mo - 1V Solution Heat Treated and StabilizedAMS4973J (Historical)06/16/2020
This specification covers a titanium alloy in the form of forgings up to 4.000 inches (101.60 mm) inclusive and forging stock.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Forgings 8Al - 1Mo - 1V Solution Heat Treated and StabilizedAMS4973J-TEST-REC (Historical)06/16/2020
This specification covers a titanium alloy in the form of forgings up to 4.000 inches (101.60 mm) inclusive and forging stock.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Welding Wire 8Al - 1Mo - 1VAMS4955J (Current)04/02/2020
This specification covers a titanium alloy in the form of welding wire.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Welding Wire 8Al - 1Mo - 1VAMS4955J-TEST-REC (Historical)04/02/2020
This specification covers a titanium alloy in the form of welding wire.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Welding Wire 6AI - 2Sn - 4Zr - 2MoAMS4952G (Current)03/18/2020
This specification covers a titanium alloy in the form of welding wire.
AMS G Titanium and Refractory Metals Committee
Celebrating Women in Engineering & Science: Renee Bernstein, CEO, Cotronics CorporationTBMG-3616703/01/2020
Titanium Alloy Bars, Forgings and Forging Stock 7.0Al - 4.0Mo AnnealedAMS6915C (Current)01/14/2020
This specification covers a titanium alloy in the form of bars up through 6.000 inches (152.40 mm) inclusive, in nominal diameter or least distance between parallel sides, forgings of thickness up through 6.000 inches (152.40 mm), inclusive and stock for forging of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Overaged 140 ksi (965 MPa) Tensile StrengthAMS4987F (Current)01/14/2020
This specification covers a titanium alloy in the form of forgings 4.00 inches (101.6 mm) and under in nominal cross-sectional thickness and of forging stock of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Round Bar and Wire 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution Heat Treated and Cold DrawnAMS4957G (Current)01/14/2020
This specification covers a titanium alloy in the form of round bar and wire, 0.625 inch (15.88 mm) and under in nominal diameter or thickness.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Sheet, Strip, and Plate 6Al - 4V Solution Heat TreatedAMS4903D (Current)01/14/2020
This specification covers a titanium alloy in the form of sheet strip and plate up through 2.000 inches (50.80 mm), inclusive.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Forgings 6AI - 4V Alpha-Beta or Beta Processed, AnnealedAMS4920G (Current)12/13/2019
This specification covers a titanium alloy in the form of forgings, 6.000 inches (152.40 mm) and under in cross-sectional thickness and forging stock of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture ToughnessAMS4931G (Current)11/05/2019
This specification covers a titanium alloy in the form of bars 6.000 inches (152.40 mm) and under in nominal diameter or least distance between parallel sides, forgings and flash welded rings 6.000 inches (152.40 mm) and under in thickness, and stock for forging and stock for flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Welding Wire 5Al - 2.5SnAMS4953H (Current)11/05/2019
This specification covers a titanium alloy in the form of welding wire.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Welding Wire 5Al - 2.5SnAMS4953H-TEST-REC (Historical)11/05/2019
This specification covers a titanium alloy in the form of welding wire.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture ToughnessAMS4931G-TEST-REC (Historical)11/05/2019
This specification covers a titanium alloy in the form of bars 6.000 inches (152.40 mm) and under in nominal diameter or least distance between parallel sides, forgings and flash welded rings 6.000 inches (152.40 mm) and under in thickness, and stock for forging and stock for flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Investigation on Microstructure and Mechanical Properties of Corrosion Resistance Alloy C-2000 Fabricated by Conventional Arc Welding Technique2019-28-017710/11/2019
In the current work the metallurgical and tensile properties of the weld joints of alloy C-2000 were investigated. Welding technique employed in this study is Tungsten Inert Gas Welding (TIG) and Pulsed Current Tungsten Inert Gas (PC-TIG) welding with autogenous mode and Ni-Cr-Mo rich ERNiCrMo-10 filler wire. The results show that PC-TIG weldment obtained the refined microstructure compared to the TIG weldment. Energy dispersive spectroscopy (EDS) showed the extent of Cr segregation was observed in all the weldments. PC-TIG welding shows reduced segregation compared to the corresponding TIG. X-ray diffraction (XRD) corroborated the existence of Ni3Cr2 phases in the weld fusion zone. Tensile test results show the PC-TIG weldment obtained marginally higher tensile properties comparing over the corresponding TIG weldment. The strength of the weldments is inferior in all cases in comparison to base metal.
John, Aashish, Jacob Johny, Kiran, Arulmurugan, Balasubramanian, Rajkumar, Sivan, Arivazhagan, Natarajan, Naiju, Chooriyaparambil Damodaran, Manikandan, Manoharan
Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 4V, Extra Low Interstitial AnnealedAMS4930K (Historical)10/10/2019
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings 4.000 inches (101.60 mm) and under in nominal diameter or distance between parallel sides, and stock for forging or flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Wire, Forgings, and Rings 6Al - 4V, Extra Low Interstitial AnnealedAMS4930K-TEST-REC (Historical)10/10/2019
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings 4.000 inches (101.60 mm) and under in nominal diameter or distance between parallel sides, and stock for forging or flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield StrengthAMS4926P (Historical)06/20/2019
This specification covers a titanium alloy in the form of bars, wire, flash welded rings 4.000 inches (101.60 mm) and under in nominal diameter or least distance between parallel sides and 16 in2 (103 cm2) and under in cross-sectional area, and stock of any size for flash welded rings.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield StrengthAMS4926P-TEST-REC (Historical)06/20/2019
This specification covers a titanium alloy in the form of bars, wire, flash welded rings 4.000 inches (101.60 mm) and under in nominal diameter or least distance between parallel sides and 16 in2 (103 cm2) and under in cross-sectional area, and stock of any size for flash welded rings.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture ToughnessAMS4931F (Historical)06/11/2019
This specification covers a titanium alloy in the form of bars 6.000 inches (152.40 mm) and under in nominal diameter or least distance between parallel sides, forgings and flash welded rings 6.000 inches (152.40 mm) and under in thickness, and stock for forging and stock for flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Standard Practice for Production, Distribution, and Procurement of Metal StockAS6279B (Current)06/10/2019
This SAE Aerospace Standard (AS) establishes requirements applicable to metal stock that is ordered and produced in accordance with an Aerospace Material Specification (AMS). Topics include producer requirements, distributor requirements, size and grain orientation nomenclature, and purchaser ordering information to distributors. Requirements of this document have been developed to address titanium and titanium alloys, aluminum and aluminum alloys, carbon and alloy steels, and corrosion and heat-resistant alloys.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and AgedAMS4934H (Historical)06/03/2019
This specification covers a titanium alloy in the form of extruded bars, and shapes, flash welded rings up through 3.000 inches (76.20 mm) inclusive, in nominal diameter or least distance between parallel sides, and stock for flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 4V Solution Heat Treated and AgedAMS4934H-TEST-REC (Historical)06/03/2019
This specification covers a titanium alloy in the form of extruded bars, and shapes, flash welded rings up through 3.000 inches (76.20 mm) inclusive, in nominal diameter or least distance between parallel sides, and stock for flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Wire, Forgings, and Rings 4.5Al - 3V - 2Fe - 2Mo AnnealedAMS4964C (Historical)05/28/2019
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, and stock for forging or flash welded ring up through 6.000 inches (152.40 mm) in nominal diameter or distance between parallel sides.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) Tensile StrengthAMS4984G (Current)05/28/2019
This specification covers a titanium alloy in the form of forgings 3.000 inches (76.20 mm) and under in nominal cross-sectional thickness and of stock for forging of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe AnnealedAMS6948B (Current)05/28/2019
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, drawn shapes 5.000 inches (127.00 mm) and under, and stock for forging or flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy, Forgings 10V - 2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged 180 ksi (1241 MPa) Tensile StrengthAMS4983G (Current)05/28/2019
This specification covers a titanium alloy in the form of forgings 1.00 inch (25.4 mm) and under in nominal cross-sectional thickness and of forging stock of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Wire, Forgings, and Rings 4.5Al - 3V - 2Fe - 2Mo AnnealedAMS4964C-TEST-REC (Historical)05/28/2019
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, and stock for forging or flash welded ring up through 6.000 inches (152.40 mm) in nominal diameter or distance between parallel sides.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Wire, Forgings, Rings, and Drawn Shapes 4Al - 2.5V -1.5 Fe AnnealedAMS6948B-TEST-REC (Historical)05/28/2019
This specification covers a titanium alloy in the form of bars, wire, forgings, flash welded rings, drawn shapes 5.000 inches (127.00 mm) and under, and stock for forging or flash welded rings of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Forgings and Forging Stock 3.0Al - 2.5V AnnealedAMS6940B (Current)05/17/2019
This specification covers a titanium alloy in the form of bars up through 1.000 inch (25.40 mm) in diameter or least distance between parallel sides, inclusive, forgings of thickness up through 1.000 inch (25.40 mm), inclusive, high strength fastener stock up through 1.250 inch (31.75 mm), inclusive, and stock for forging of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Forgings and Forging Stock 3.0Al - 2.5V AnnealedAMS6940B-TEST-REC (Historical)05/17/2019
This specification covers a titanium alloy in the form of bars up through 1.000 inch (25.40 mm) in diameter or least distance between parallel sides, inclusive, forgings of thickness up through 1.000 inch (25.40 mm), inclusive, high strength fastener stock up through 1.250 inch (31.75 mm), inclusive, and stock for forging of any size.
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Forgings and Forging Stock 6Al - 6V - 2Sn AnnealedAMS6936C (Current)04/05/2019
This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, with bars and forgings having a maximum cross-sectional area of 32 in2 (204.5 cm2), and stock for forging of any size (see 8.6).
AMS G Titanium and Refractory Metals Committee
Titanium Alloy Bars, Forgings and Forging Stock 6Al - 6V - 2Sn AnnealedAMS6936C-TEST-REC (Historical)04/05/2019
This specification covers a titanium alloy in the form of bars up through 4.000 inches (101.60 mm) in nominal diameter or least distance between parallel sides, inclusive, forgings of thickness up through 4.000 inches (101.60 mm), inclusive, with bars and forgings having a maximum cross-sectional area of 32 in2 (204.5 cm2), and stock for forging of any size (see 8.6).
AMS G Titanium and Refractory Metals Committee
Items per page:
1 – 50 of 355