Browse Topic: Identification numbers

Items (3,912)
Find
Vehicle interior material emissions and contributions in passenger vehicle cabin air quality2026-26-02871/16/2026
Polymer compounds used in the manufacturing of automotive interiors are formulated with various kind of additives, pigments, fillers, and resins. These compounded polymers are prone to the emission of chemicals called volatile organic compound (VOC) over a period of usage, temperature exposure etc. VOCs include a variety of chemicals, some of which may have short term adverse health effects like nausea, headache, vomiting, and long-term adverse health effects like cancer, even death if beyond the permissible limits. Studies indicates the concentrations of many VOCs are consistently higher in indoors (up to ten times higher) than outdoors and hence these chemical emissions are required to be controlled within the defined limits. This paper is focused on the identification part and material, evaluation against the recommended test (Odor/Fogging/VOC/Carbonyl compound emissions) and development of materials used inside the car cabin. This study further provides the guidelines for the
Shukla, Sandeep Kumar
Hard Anodic Coating of Magnesium AlloysAMS2466D (Current)12/9/2025
This specification covers the requirements for a hard anodic coating on magnesium alloys.
AMS B Finishes Processes and Fluids Committee
Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.5Mg (355.0-T71), Solution Heat Treated and OveragedAMS4280K (Current)12/9/2025
This specification covers an aluminum alloy in the form of permanent mold castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Investment Castings, 7.0Si - 0.32Mg (356.0-T6), Solution and Precipitation Heat TreatedAMS4260H (Current)12/9/2025
This specification covers an aluminum alloy in the form of castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Castings, 7.0Si - 0.55Mg - 0.12Ti (F357.0-T6), Solution and Precipitation Heat TreatedAMS4289A (Current)12/9/2025
This specification covers an aluminum alloy in the form of castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.50Mg (355.0-T6), Solution and Precipitation Heat TreatedAMS4281H (Current)12/9/2025
This specification covers an aluminum alloy in the form of permanent mold castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged AMS4242D (Current)12/9/2025
This specification covers an aluminum alloy in the form of castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged AMS4223F (Current)12/9/2025
This specification covers an aluminum alloy in the form of castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Castings, High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged AMS4229H (Current)12/9/2025
This specification covers an aluminum alloy in the form of sand, permanent mold, and composite mold castings.
AMS D Nonferrous Alloys Committee
Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) AMS6370S (Current)11/25/2025
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
AMS E Carbon and Low Alloy Steels Committee
Steel Bars, Forgings, and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640) AMS6312L (Current)11/25/2025
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc or Electroslag Remelted AMS6277K (Current)11/25/2025
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
Cobalt Alloy, Corrosion and Heat-Resistant, Investment Castings, 50.5Co - 26Cr - 15Ni - 6.0Mo, As-CastAMS5380H (Current)11/25/2025
This specification covers a corrosion and heat-resistant cobalt alloy in the form of investment castings.
AMS F Corrosion Heat Resistant Alloys Committee
Steel, Bars and Forgings, 0.18 - 0.23C (SAE 1022) AMS5070L (Historical)11/25/2025
This specification covers a carbon steel in the form of bars up through 3.000 inches (76.2 mm), forgings, and forging stock.
AMS E Carbon and Low Alloy Steels Committee
Nickel-Aluminum-Bronze, Martensitic, Sand, Centrifugal and Continuous Castings, 78Cu - 11Al - 5.1Ni - 4.8Fe, Quench Hardened and Temper AnnealedAMS4881E (Current)11/25/2025
This specification covers a nickel-aluminum bronze alloy in the form of sand, centrifugal or continuous castings.
AMS D Nonferrous Alloys Committee
Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings, 81.5Cu - 10.3Al - 5.0Ni - 2.8Fe, Quench Hardened and Temper Annealed (TQ50)AMS4880E (Current)11/25/2025
This specification covers an aluminum bronze alloy in the form of centrifugal and continuous-cast castings.
AMS D Nonferrous Alloys Committee
Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe As CastAMS4870G (Current)11/25/2025
This specification covers an aluminum bronze alloy in the form of centrifugal and chill castings.
AMS D Nonferrous Alloys Committee
Castings, Leaded Bronze, Sand and Centrifugal 80Cu - 10Sn - 9.5Pb As CastAMS4842G (Current)11/25/2025
This specification covers a leaded bronze in the form of sand and centrifugal castings.
AMS D Nonferrous Alloys Committee
Cast Aluminum Alloy Composite 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P) Sand Cast, Solution, and Precipitation Heat TreatedAMS4482B (Current)11/25/2025
This specification covers a dilute aluminum/TiB2 metal matrix composite in the form of sand castings.
AMS D Nonferrous Alloys Committee
Cast Aluminum Alloy Composite, 4.6Cu - 3.4Ti - 1.4B - 0.75Ag - 0.27Mg (205.0/TiB2/3p-T7P), Investment Cast, Solution and Precipitation Heat TreatedAMS4471C (Current)11/25/2025
This specification covers a dilute aluminum/TiB2 metal matrix composite in the form of investment castings.
AMS D Nonferrous Alloys Committee
Verifying large alternate product code for an J document - J112425-2J_2112420000000000000000000000/2X_202511 (Current)11/24/2025
Verifying large alternate product code for an J document - J112425-2
Active Safety Systems Standards Committee
Verifying large alternate product code for an AMS document - AMS112425-1AMS112425XXXXXXXXXXXXXXXXXXXXXX-1 (Current)11/24/2025
Verifying large alternate product code for an AMS document - AMS112425-1
A-10 Aircraft Oxygen Equipment Committee
Aluminum Alloy, Extruded Wide Panel Profiles (7150-T77511), 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr, Solution Heat Treated, Stress-Relieved, Straightened and OveragedAMS4325B (Current)11/21/2025
AMS4325A prohibits unauthorized exceptions (3.7), revises condition (3.2), properties (3.4.5), quality (3.5.1), reports (4.4.1), and identification (5.1.1), and results from a Five-Year Review and update of this specification.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Die Castings 8.5Si - 3.5Cu (A380.0-F) As Cast AMS4291K (Current)11/21/2025
This specification covers an aluminum alloy in the form of die castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Die Castings 9.5Si - 0.50Mg (360.0-F) As Cast AMS4290N (Current)11/21/2025
This specification covers an aluminum alloy in the form of die castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Castings, Centrifugal 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated AMS4285G (Current)11/21/2025
This specification covers an aluminum alloy in the form of centrifugal castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy Castings, Permanent Mold 7.0Si - 0.30Mg (356.0-T6) Solution and Precipitation Heat Treated AMS4284L (Current)11/21/2025
This specification covers an aluminum alloy in the form of permanent mold castings.
AMS D Nonferrous Alloys Committee
Aluminum Alloy, Castings, 5.0Si - 1.2Cu - 0.50Mg (C355.0-T6), Solution and Precipitation Heat TreatedAMS4215K (Current)11/13/2025
This specification covers an aluminum alloy in the form of sand, permanent mold, composite mold, and investment castings.
AMS D Nonferrous Alloys Committee
Arresting Hook Installation, Land-Based AircraftARP1538C (Current)11/11/2025
This SAE Aerospace Recommended Practice (ARP) covers the recommended criteria and performance requirements for the design and installation of land-based aircraft emergency and operational arresting hooks for use on runway arresting systems. Design criteria for fully operational hooks and for carrier-based aircraft hook installations are contained in specification MIL-A-18717.
A-5B Gears, Struts and Couplings CommitteeNEW
Automated Gaseous Nitrocarburizing Controlled by PotentialsAMS2759/12C (Current)11/10/2025
This specification covers the requirements for producing a continuous white layer with controlled extent of porosity by means of a gaseous process, automatically controlled to maintain set values of the nitriding and carburizing potentials that determine properties of the nitrocarburized surface. Automatic control is intended to ensure repeatability of nitrogen and carbon content of the white layer which influences properties such as wear and corrosion resistance, ductility and fatigue strength.
AMS B Finishes Processes and Fluids Committee
Cover Assembly, Electrical, for MS27212 Terminal Board AssemblyAS18029E (Historical)10/2/2025
Scope is unavailable.
AE-8C2 Terminating Devices and Tooling Committee
Aluminum Alloy, Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and OveragedAMS4329C (Current)9/30/2025
This specification covers an aluminum alloy in the form of plate 4.001 to 7.000 inch, incl. (101.62 to 177.80 mm, incl.) in thickness (see 8.4).
AMS D Nonferrous Alloys Committee
IAQG-03282025-1 IAQG-03282025-1 (Current)4/2/2025
IAQG-03282025-1
IAQG-1 Standards Committee
Analysis of Left-Turn Mixed Traffic Flow Dynamics at Y-Shaped Signalized Intersections Using Cellular Automata2025-01-72042/21/2025
Through the method of on-site video observation, this study divides the intersection area into three parts according to the road traffic characteristics of the Y-shaped signalized intersections, and at the same time obtains the relevant parameters. These parameters include the left-turn speed and traffic density of motor vehicles within both the internal and exit areas, the frequency of lane-changing and queuing behaviors of non-motorized vehicles in the internal area, and the left-turn speed and traffic density of non-motorized vehicles in both the internal and exit areas. The data extraction and analysis of the parameters provide strong data support for further analysis of the subsequent mixed traffic flow. A cellular automaton model is developed using the intersection’s exit area as the scenario. The exit area is divided into three lanes based on the queuing patterns of mixed traffic. Corresponding traffic rules are established according to the traffic density of motorized and non
Yuan, Li, Liu, Xiaowei
High-Fidelity Digital Twin Autoclave for Quality Informed Composite FabricationF-0080-2024-11395/7/2024
The Autoclave processing is commonly used in manufacturing high-performance fibre-reinforced thermoset composite components in the aerospace industry. Variations in the cure cycle, sometimes even apparently minor deviations from the prescribed cure cycle, can harm the laminate properties. Given the costly and time-consuming autoclave manufacturing process, there is a strong need to cure the maximum number of parts in the shortest possible time without compromising quality. In order to achieve high-rate automated manufacturing with the optimized autoclave process, it is important to construct a digital twin modelling approach to mirror the physical composite curing process in the virtual domain based on the integration of high-fidelity multi-physics models. The resulting digital twin includes a thermal CFD model, a thermo-chemo-mechanical module, and an efficient and accurate block coupling between these two modules. The customized Abaqus driven by local and spatial variation of the
Lua, Jim, Phan, Nam, Guay, Ian, Yan, Jinhui, Karuppiah, Anand, Shrestha, Kalyan
OPTIMISED DESIGN SOLUTION FOR FLOOR CONSOLE AND SIMILAR COMPONENTS2024-26-03201/16/2024
Traditionally floor console design requires structural part inside the assembly to mount surrounding parts to withstand various load cases and functionality. this leads to heavy assembly weight & greater number of parts in assembly. This will also impact on overall cost of the component as well as assembly cycle time, logistics & maintenance cost. In order to address this issue for any floor console or similar component which requires structural part inside for rigidity we thought of redesigning our parts and use of CPSF injection molded parts without impacting aesthetics. Counter pressure structural foam (CPSF) process allows us to design in more structural and thicker parts while still it gives good class a quality. CPSF process is similar to IM process only, but here along with thermoplastic materials in pelletized form and blowing agent is also added in hopper in proper ratio. Components similar like floor console requires more strengthen parts for holding loads & occupant sitting
Kole, Abhinandan, John, Pramod, pena, Geofrey
682 Guidance for Air Transport Service Bulletins (TEST POPST CT and APPSEARCH)ARINC682 (Current)9/21/2022
This document provides industry guidance to supplement ATA standards and airframe requirements, addressing gaps and vague areas to move suppliers/vendors and airframers toward a common standard for format and wording in Vendor Service Bulletins (VSB) for Air Transport components. This document supplements the VSB guidance of iSpec 2200, providing clarity of requirements and resulting in a common standard wording and format of VSBs from all suppliers on all aircraft types. The guidance in this document is intended to be applied to VSBs created and released subsequent to the release of the guidance document and will not require the retroactive update of VSBs released prior to the creation and release of the guidance.
PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, "O" RINGAS29513C (Current)11/9/2021
A-6C2 Seals Committee
CRIMPING TOOLS, TERMINAL, HAND, WIRE TERMINATION; FOR CRIMP TYPE REMOVABLE CONTACTS, ELECTRIC CONNECTORSAS22520/17A (Current)11/9/2021
AE-8C2 Terminating Devices and Tooling Committee
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS81659 SERIES 2 CONNECTORS)AS39029/11C (Historical)11/9/2021
AE-8C1 Connectors Committee
HYDROCARBON FUEL RESISTANT, TUBE FITTING, O-RING MOLDED FROM AMS-P-5315 RUBBERAS29512C (Current)11/9/2021
A-6C2 Seals Committee
BOLT, MACHINE - TEE HEAD, CHAMFERED CLASSIFICATION: 1210 MPA/730 °C CLOSE TOL SHANK, UNS N07001, METRICMA3446B (Current)11/9/2021
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - TEE HEAD, CHAMFERED CLASSIFICATION: 1210 MPA/730 °C CLOSE TOL SHANK, UNS N07001, METRICMA3446B-TEST-REC (Historical)11/9/2021
E-25 General Standards for Aerospace and Propulsion Systems
O-RING MOLDED FROM AMS7268 (SILICONE) MATERIALAS5728B (Current)11/8/2021
A-6C2 Seals Committee
O-RING, STRAIGHT THREAD TUBE FITTING BOSS MOLDED FROM AMS-P-5510 RUBBERAS28778C (Current)11/8/2021
A-6C2 Seals Committee
O-RING MOLDED FROM AMS7276 MATERIALAS83248/1A (Current)11/8/2021
A-6C2 Seals Committee
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, BLACK OXIDE, STEEL UNS G87400, 125 KSI MIN, .1900-32 UNJF-3AAS9294C (Current)11/3/2021
E-25 General Standards for Aerospace and Propulsion Systems
BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07001, .4375-20 UNJF-3AAS9700 (Current)11/3/2021
E-25 General Standards for Aerospace and Propulsion Systems
LINK, TERMINAL, CONNECTINGAS25226C (Current)10/28/2021
AE-8C2 Terminating Devices and Tooling Committee
BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07001, .1640-36 UNJF-3AAS9695 (Current)10/28/2021
E-25 General Standards for Aerospace and Propulsion Systems
Items per page:
1 – 50 of 3912