Material Specifications - SAE Mobilus

Items (19,222)

Rubber, Fluorocarbon Elastomer (FKM), 70 to 80 Hardness, Low Temperature Sealing Tg -22°F (-30°C), For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic Systems

AMS3384A (Current)

12/09/2025

This specification covers a high temperature, compression set and fluid resistant fluorocarbon (FKM) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes for aeronautical and aerospace applications.

AMS CE Elastomers Committee

Hard Anodic Coating of Magnesium Alloys

AMS2466D (Current)

12/09/2025

This specification covers the requirements for a hard anodic coating on magnesium alloys.

AMS B Finishes Processes and Fluids Committee

Tolerances Titanium and Titanium Alloy Extruded Bars, Rods, and Shapes

AMS2245D (Current)

12/09/2025

This specification covers established manufacturing tolerances applicable to titanium and titanium alloy extruded bars, rods, and shapes. These tolerances apply to all conditions, unless otherwise noted. The term "excl" applies only to the higher figure of the specified range.

AMS G Titanium and Refractory Metals Committee

Trace Element Control, Nickel Alloy Castings

AMS2280E (Current)

12/09/2025

<p>This specification establishes testing methods and maximum permissible limits for trace elements in nickel alloy castings.</p>

AMS F Corrosion Heat Resistant Alloys Committee

Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.5Mg (355.0-T71), Solution Heat Treated and Overaged

AMS4280K (Current)

12/09/2025

This specification covers an aluminum alloy in the form of permanent mold castings.

AMS D Nonferrous Alloys Committee

Aluminum Alloy, Investment Castings, 7.0Si - 0.32Mg (356.0-T6), Solution and Precipitation Heat Treated

AMS4260H (Current)

12/09/2025

This specification covers an aluminum alloy in the form of castings.

AMS D Nonferrous Alloys Committee

Aluminum Alloy Castings, 7.0Si - 0.55Mg - 0.12Ti (F357.0-T6), Solution and Precipitation Heat Treated

AMS4289A (Current)

12/09/2025

This specification covers an aluminum alloy in the form of castings.

AMS D Nonferrous Alloys Committee

Aluminum Alloy Castings, Permanent Mold, 5.0Si - 1.2Cu - 0.50Mg (355.0-T6), Solution and Precipitation Heat Treated

AMS4281H (Current)

12/09/2025

This specification covers an aluminum alloy in the form of permanent mold castings.

AMS D Nonferrous Alloys Committee

Aluminum Alloy, Castings 4.7Cu - 0.60Ag - 0.35Mn - 0.25Mg - 0.25Ti (B201.0-T7) Solution Heat Treated and Overaged

AMS4242D (Current)

12/09/2025

This specification covers an aluminum alloy in the form of castings.

AMS D Nonferrous Alloys Committee

Aluminum Alloy, Castings 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T4) Solution Heat Treated and Naturally Aged

AMS4223F (Current)

12/09/2025

This specification covers an aluminum alloy in the form of castings.

AMS D Nonferrous Alloys Committee

Aluminum Alloy Castings, High Strength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution Heat Treated and Overaged

AMS4229H (Current)

12/09/2025

This specification covers an aluminum alloy in the form of sand, permanent mold, and composite mold castings.

AMS D Nonferrous Alloys Committee

Cloths, Cleaning, For Aircraft Primary and Secondary Structural Surfaces

AMS3819E (Current)

12/09/2025

This specification covers woven, nonwoven, and knit absorbent materials supplied either as dry cloths or presaturated cloths for solvent cleaning process applications.

AMS G9 Aerospace Sealing Committee

Steel, Corrosion Resistant, Sheet, Strip, and Foil, 19Cr - 9.5Ni (304), Cold Rolled, 125 ksi (862 MPa) Tensile Strength

AMS5501G (Current)

12/08/2025

This specification covers a corrosion-resistant steel in the form of sheet, strip, and foil 0.005 inch (0.13 mm) and over in nominal thickness (see 8.4).

AMS F Corrosion Heat Resistant Alloys Committee

Hard Anodic Coating on Aluminum and Aluminum Alloys

AMS2469J (Current)

12/08/2025

This specification establishes the requirements for a hard anodic coating on aluminum and aluminum alloys.

AMS B Finishes Processes and Fluids Committee

Steel, Sheet, Strip, and Plate 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (H-11)

AMS6437L (Current)

11/25/2025

This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.

AMS E Carbon and Low Alloy Steels Committee

Steel Sheet, Strip, and Plate, 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C), Annealed

AMS6396H (Current)

11/25/2025

This specification covers an aircraft quality, low alloy steel in the form of sheet, strip, and plate.

AMS E Carbon and Low Alloy Steels Committee

Steel Tubing, Seam-Free, Round, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130), 95.0 ksi (655 MPa) Tensile Strength

AMS6374F (Current)

11/25/2025

This specification covers an aircraft-quality, low-alloy steel in the form of round, non-welded tubing free from OD surface seams.

AMS E Carbon and Low Alloy Steels Committee

Steel, Welded Tubing, 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)

AMS6373K (Current)

11/25/2025

This specification covers an aircraft-quality, low-alloy steel in the form of welded tubing.

AMS E Carbon and Low Alloy Steels Committee

Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130)

AMS6370S (Current)

11/25/2025

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.

AMS E Carbon and Low Alloy Steels Committee

Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)

AMS6358M (Current)

11/25/2025

This specification covers an aircraft quality, low alloy steel in the form of sheet, strip, and plate.

AMS E Carbon and Low Alloy Steels Committee

Steel Sheet, Strip, and Plate 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (8735)

AMS6357N (Current)

11/25/2025

This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.

AMS E Carbon and Low Alloy Steels Committee

Steel Bars, Forgings, and Tubing 1.8Ni - 0.25Mo (0.38 - 0.43C) (4640)

AMS6312L (Current)

11/25/2025

This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

AMS E Carbon and Low Alloy Steels Committee

Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc or Electroslag Remelted

AMS6277K (Current)

11/25/2025

This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

AMS E Carbon and Low Alloy Steels Committee

Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable

AMS5950E (Current)

11/25/2025

This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet and strip 0.080 inch (2.03 mm) and under in nominal thickness (see 8.8).

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion-Resistant, Sheet and Strip, 19Cr - 9.2Ni (304), Cold Rolled, Full Hard, 185 ksi (1276 MPa) Tensile Strength

AMS5913D (Current)

11/25/2025

This specification covers a corrosion-resistant steel in the form of sheet and strip over 0.005 inch (0.13 mm) in nominal thickness (see 8.6).

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion-Resistant, Sheet and Strip, 19Cr - 9.2Ni (304), Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength

AMS5912D (Current)

11/25/2025

This specification covers a corrosion-resistant steel in the form of sheet and strip over 0.005 inch (0.13 mm) in nominal thickness (see 8.6).

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion-Resistant, Sheet and Strip, 19Cr - 9.2Ni (304), Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength

AMS5911D (Current)

11/25/2025

This specification covers a corrosion-resistant steel in the form of sheet and strip over 0.005 inch (0.13 mm) in nominal thickness (see 8.6).

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion-Resistant, Sheet and Strip, 18Cr - 8Ni (301), Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength

AMS5902E (Current)

11/25/2025

This specification covers a corrosion-resistant steel in the form of sheet and strip over 0.005-inch (0.13-mm) in nominal thickness (see 8.6).

AMS F Corrosion Heat Resistant Alloys Committee

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La, Solution Heat Treated

AMS5891D (Current)

11/25/2025

This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading.

AMS F Corrosion Heat Resistant Alloys Committee

Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Solution Heat Treated

AMS5869E (Current)

11/25/2025

This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet, strip, and plate up to 1.000 inch (25.40 mm) in nominal thickness (see 8.7).

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion Resistant, Bars and Wire, 19Cr - 10Ni (304), High Yield Strength, Solution Heat Treated and Cold Worked

AMS5857E (Current)

11/25/2025

This specification covers a corrosion-resistant steel in the form of cold-worked bars and wire up to 1.750 inch (44.45 mm) inclusive, in nominal diameter or least distance between parallel sides (see 8.4).

AMS F Corrosion Heat Resistant Alloys Committee

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings 61Ni - 20.5Cr - 8.5Mo - 3.4Cb(Nb) - 1.3Ti - 5.0Fe Consumable Electrode or Vacuum Induction Melted Solution Heat Treated

AMS5854D (Current)

11/25/2025

This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, wire, forgings, flash welded rings, and extrusions 4 inches (102 mm) and under in nominal diameter or least distance between parallel sides, and stock for forging or flash welded rings.

AMS F Corrosion Heat Resistant Alloys Committee

Alloy, Corrosion-Resistant, Round Bars, 20Cr - 35Ni - 35Co - 10Mo, Vacuum Induction Plus Consumable Electrode Vacuum Remelted, Solution Heat Treated, Work Strengthened, and Aged

AMS5845L (Current)

11/25/2025

This specification covers a high-strength, corrosion-resistant alloy in the form of bar up to 1.75 inches (44.4 mm) in diameter (see 8.2 and 8.7).

AMS F Corrosion Heat Resistant Alloys Committee

Alloy, Corrosion-Resistant, Round Bars, 20Cr - 35Ni - 35Co - 10Mo, Vacuum Induction Plus Consumable Electrode Vacuum Remelted, Solution Heat Treated and Work Strengthened

AMS5844K (Current)

11/25/2025

This specification covers a high-strength, corrosion-resistant alloy in the form of bars up to 1.75 inches (44.4 mm) in diameter (see 8.2 and 8.7).

AMS F Corrosion Heat Resistant Alloys Committee

Cobalt Alloy, Corrosion and Heat Resistant, Hardfacing Rod and Wire, 62Co - 27 Cr - 2.9Ni - 5.5Mo

AMS5819B (Current)

11/25/2025

This specification covers a corrosion and heat-resistant cobalt alloy in the form of welding rods or wrought wire.

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion and Heat Resistant, Flat Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Treated, Cold Drawn or Cold Rolled and Aged, Consumable Electrode Remelted

AMS5810C (Current)

11/25/2025

This specification covers a corrosion and heat resistant steel in the form of flat wire.

AMS F Corrosion Heat Resistant Alloys Committee

Iron Alloy, Corrosion and Heat-Resistant, Welding Wire, 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N, Annealed

AMS5794G (Current)

11/25/2025

This specification covers a corrosion and heat-resistant iron alloy in the form of welding wire.

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion and Heat-Resistant, Welding Wire, 20Cr - 10Ni - 0.75Cb, High Ferrite Grade

AMS5790F (Current)

11/25/2025

This specification covers a corrosion and heat-resistant steel in the form of welding wire.

AMS F Corrosion Heat Resistant Alloys Committee

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 74Ni - 7.0Cr - 16.5Mo, Solution Heat Treated

AMS5771H (Current)

11/25/2025

This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion Resistant, Bars, Wire, and Forgings 5.8Mn - 17Cr - 5.8Ni - 2.0Cu - 0.26S Free Machining, Solution Heat Treated

AMS5762H (Current)

11/25/2025

This specification covers a free-machining, corrosion-resistant steel in the form of bars, wire, forgings, and forging stock.

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Consumable Electrode Remelted Solution Heat Treated, Sub-Zero Cooled, Equalized, and Over-Tempered

AMS5743L (Current)

11/25/2025

This specification covers a corrosion and heat-resistant steel in the form of bars, forgings, and forging stock. These products have been used typically for parts requiring oxidation resistance and high strength up to 800 °F (427 °C) and where such parts may require welding during fabrication, but usage is not limited to such applications.

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion Resistant, Bars and Wire, 18Cr - 9Ni (303F), Free Machining, High Yield Strength, Solution Heat Treated and Cold Worked

AMS5738F (Current)

11/25/2025

This specification covers a free-machining, corrosion-resistant steel in the form of cold-worked bars and wire up to 1.750 inches (44.45 mm) inclusive, in nominal diameter or least distance between parallel sides (see 8.5).

AMS F Corrosion Heat Resistant Alloys Committee

Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings, 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B, Consumable Electrode or Vacuum Induction Melted, 1975 °F (1079 °C) Solution, Stabilization, and Precipitation Heat Treated

AMS5709K (Current)

11/25/2025

This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, and forging stock.

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion and Heat-Resistant, Welding Wire 19Cr - 12.5Ni - 2.5Mo

AMS5696F (Current)

11/25/2025

This specification covers a corrosion and heat-resistant steel in the form of welding wire.

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion-Resistant, Bars and Forgings 0.14S - 18Cr - 9.5Ni - 0.50Mo - 0.80Al (303MA) Free-Machining; Swaging or Upsetting Solution Heat Treated

AMS5638H (Current)

11/25/2025

This specification covers a free-machining, corrosion-resistant steel in the form of bars, forgings, and forging stock.

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution Heat Treated, Precipitation Hardenable Consumable Electrode Remelted

AMS5622H (Current)

11/25/2025

This specification covers a premium aircraft-quality corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, flash welded rings up to 8.0 inches (203 mm) in diameter or least distance between parallel sides in the solution heat treated condition (see 8.4), and stock of any size for forging, flash welded rings, or heading (see 8.8).

AMS F Corrosion Heat Resistant Alloys Committee

Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate, 18Cr - 13Ni - 2.5Mo (SAE 30316), Solution Heat Treated

AMS5524N (Current)

11/25/2025

This specification covers a corrosion and heat-resistant steel in the form of sheet, strip, and plate over 0.005 inch (0.13 mm) in nominal thickness (see 8.7).

AMS F Corrosion Heat Resistant Alloys Committee