J493_196106 Rod Ends and Clevis Pins
06/01/1961
- Issuing Committee
- Content
- Material--SAE 1010 or SAE 1111 steel or equivalent. Clevis pins shall be supplied either soft or cyanide hardened as specified. Clevis pins must be free from burrs, loose scale, sharp edges, and all other defects that might affect their serviceability. General tolerances for all dimensions are plus or minus 0.010 unless otherwise specified.
- Pages
- 4
- Citation
- SAE International Technical Standard, Rod Ends and Clevis Pins, SAE Standard J493_196106, Issued June 1961, https://doi.org/10.4271/J493_196106.