J1194_197706 Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors
06/01/1977
- Content
- Fulfillment of the intended purpose requires testing as follows: A laboratory test, under repeatable and controlled loading, to permit analysis of the ROPS for compliance with the performance requirements of this SAE Standard. Either the static test (6.1) or the dynamic test (6.2) shall be conducted. A crush test to verify the effectiveness of the deformed ROPS in supporting the tractor in an upset attitude. A field upset test under reasonably controlled conditions, both to the rear and side, to verify the effectiveness of the protective system under actual dynamic conditions. (See 6.4.1.1 for requirements for the omission of this test). In addition to the laboratory and field loading requirements, there is a temperature-material requirement. (See 7.1.2.) The test procedures and performance requirements outlined in this document are based on currently available engineering data.
- Pages
- 8
- Citation
- SAE International Technical Standard, Rollover Protective Structures (ROPS) for Wheeled Agricultural Tractors, SAE Standard J1194_197706, Issued June 1977, https://doi.org/10.4271/J1194_197706.