AMS5355D Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
Reaffirmed
8/10/2011
- Content
- This specification covers a corrosion resistant steel in the form of investment castings. These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 °F (316 °C), but usage is not limited to such applications (See 8.3). Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 °F (538 °C).
- Pages
- 10
- Citation
- SAE International Material Specification, Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated, SAE Standard AMS5355D, Reaffirmed August 2011, Issued November 1944, https://doi.org/10.4271/AMS5355D.