SAE-JRNL-00005: SAE International Journal of Materials and Manufacturing

Aims & Scope

Content

Test...The SAE International Journal of Materials and Manufacturing publishes peer-reviewed, authoritative, and in-depth research in the areas of materials, design, testing, and manufacturing. In addition to analytical findings, the journal addresses integration and implementation of scientific and engineering practices that advance the state of the art and benefit society. The journal presents and promotes wide-ranging research on the following areas:

Materials - such as materials development, analysis, modeling, and testing (including ferrous and non-ferrous materials such as plastic, composites, elastomers, casting materials, and additive manufacturing; coatings; welding/joints/fastenings; and tribology/bearings/lubricants)
Design - such as model-based system engineering, computer-aided engineering analysis/design process, reliability design/analysis, and optimization (including durability/fatigue/life cycle, crashworthiness and light weighting, forming, failure analysis, composites, multibody dynamics, computational gas and fluid dynamics, multi-discipline interaction, microstructure-mechanics-based technologies, reliability/robustness, uncertainty/model validation and verification, and multidisciplinary optimization)
Testing - such as duty cycle data acquisition and target setting techniques, accelerated life test, vibration shaker test, real time simulation test, and test planning, execution, and analysis (including non-destructive and destructive test methods)
Manufacturing - such as manufacturing systems, processes, simulations, and methodologies (including forming, joining, assembling, lean manufacturing, agile manufacturing, hybrid lean-agile manufacturing, and supply chain)

Indexed in

Content: CNKI
ESCI (Emerging Sources Citation Index, Web of Science)
Engineering Village (Ei Compendex)
IET Inspec
Japan Science and Technology (JST) Agency
JSTOR Sustainability Collection
Scopus

Editorial Board

Editor in Chief: Dr. Yung-Li Lee, Stellantis, USA
Dr. Yung-Li Lee is a Durability Senior Technical Fellow at Stellantis in Auburn Hills, Michigan. He has been with Chrysler since 1988, and is responsible for facilitating the development and implementation of state-of-the-art durability technologies for product designs, analysis, and testing. He is also a Fellow of Society of Automotive Engineers (SAE) and an Adjunct Professor in Mechanical Engineering of the Oakland University in Michigan. He received both M.S. and Ph.D. degrees in Structural Engineering from University of Wisconsin-Madison.

Dr. Lee is the Editor-in-Chief of the SAE International Journal of Materials and Manufacturing. He was the recipient of the following awards: 2020 Ernst Gaßner Award from Fraunhofer LBF, 2017 SAE International Leader Citation Award, and 2012 SAE Henry Ford II Distinguished Award. He has co-authored two fatigue textbooks and published more than 100 peer-reviewed publications.

Editorial Board

Content: Associate Editors
Beena Anand, DTE Energy, USA
Mark E. Barkey, Aerospace Engineering and Mechanics, The University of Alabama, USA
Guofei Chen, General Motors, USA
Anindya Deb, Indian Institute of Science, India
Efthimio Duni, Stellantis, Italy
Salah Elmoselhy, Department of Physics, Faculty of Sciences and Technology, The University of Coimbra, Coimbra, Portugal
Matteo Luca Facchinetti, Stellantis, France
Randy J. Gu, Oakland University, USA
Huairui (Harry) Guo, Stellantis, USA
Shinji Hashimura, Shibaura Institute of Technology, Japan
Yuanding Huang, Helmholtz-Zentrum Hereon, Germany
Hong-Tae Kang, The University of Michigan-Dearborn, USA
Chien-Shing Lee, Purdue University, USA
Fan Li, General Motors, USA
Pai-Chen Lin, National Chung Cheng University, Chia-Yi, Taiwan, R.O.C.
Iris Liu, 51 Consultant, Japan
Kuang-Jen Liu, Karma Automotive, USA
Vic Liu, GM Global R&D Center, USA
Y. Charles Lu, University of Kentucky, USA
Behzad Mahmoudi, Chevron, USA
Vijaykumar Mannari, Eastern Michigan University, USA
Sean McKelvey, Stellantis, USA
Sandeep Medikonda, Ansys Inc., USA
Zissimos Mourelatos, Oakland University, USA
Jwo Pan, University of Michigan, USA
Jianchao Pang, Institute of Metal Research, Chinese Academy of Sciences, China
Srikanth Pilla, Clemson University, USA
Jose I. Rojas, Universitat Politècnica de Catalunya (UPC BarcelonaTECH), Spain
Siegfried Schmauder, University of Stuttgart, Germany
Guangtian (Gavin) Song, Ford Motor Company, USA
Herman Tang, Eastern Michigan University, USA
Ravi Thyagarajan, U.S. Army RDECOM-TARDEC, USA
Jonathan Weiler, Meridian Lightweight Technologies, Canada
Xijia Wu, National Research Council Canada, Canada
Yong Xia, Tsinghua University, China
Lianxiang Yang, Oakland University, USA
Ren-Jye Yang, Chung Yuan Christian University, Taiwan, R.O.C.
Xiaobo Yang, Oshkosh Corp., USA
Jay Zhou, JHZ Strategic QA, USA
Shun-Peng Zhu, University of Electronic Science and Technology of China, China
Qian (Beth) Zou, Oakland University, USA