Automatic Alert System to enable safe ride and to prevent accidents in Two Wheelers and Three Wheelers

In Midway, accidents are general in nature on the highways. Vehicles meeting the accidents are not saved in a faster way for the rescue. This system operates the signal from the seat belt sensor, during the operation of the vehicle. An Electronic Control Unit (ECU) has been deployed to provide the information about the passenger mobile phone contacts and the nearest safety officer with respect to the Global Positioning System installed in the vehicle. The signal from the seat belt fastening system for the driver and the front seat passenger is indicating the dearer contacts and the health of the centers for the rapid recovery of the vehicle met with an accident. This ECU also monitors the health condition of the passengers for the safety ride with respect to the pressure and the temperature of the cabin to make the passenger a safe ride. 20 sensors are deployed in the seat belt and the signals from these sensors are fed into an electronic control unit for further processing. The validation of this system performance has been performed by providing the dummies in the front passenger seat belt and the driver seat belt. The feedback resulted that the signals have taken 5 microseconds as the maximum time to reach the stipulated mobile number and the health center. This enhances the prevention of the driver cum front passenger to travel without proper fastening of the seat belt during the vehicle operation.